Commercial Satellite Video Management System For Lodging and Institutions

 

COM3000

Technicolor, the world-wide leader in video technologies, presents the next generation COM3000 High-Definition satellite headend solution.  Designed specifically for hotels and similar installations where there is a need for a single wire solution for multiple televisions, the COM3000 system offers up to 138 HD channels per 3RU of rack space in a high density scalable solution for video distribution, while allowing individual TV channel selection.  The key components are:

COM400

COM400.jpg

The COM400 chassis is the foundation for the COM3000 system providing the housing, power supply, 10 GbE backplane, managed switch and cooling system required for the DIRECTV receiver blades and Edge QAMs.

COM51

COM51.jpg

The COM51 receiver blade is the next generation in a family of DIRECTV receivers specially designed for the commercial market. This high density receiver can output 8 to 23 channels of High Definition and is 4K capable.

QAM20

QAM20.jpg

The QAM20 is specifically designed to work with the new high density of the COM3000. A single QAM20 module comes standard with 16 QAM channels and is upgradeable to 48 ensuring enough capacity for

DCI401MCS

HD content delivered over an RF distribution requires content protection. For the hospitality market, the content protection system of choice is Pro:Idiom™. Commercial TV sets can be purchased which will decrypt this protection in order to properly display content. However, in applications where commercial TV sets are either not available or have not been deployed, the DCI401MCS is the perfect solution.

This small adapter box can receive modulated RF content, decrypt Pro:Idiom™ protected content from a COM3000, then deliver it to a display using an HDMI connector. When used with a COM3000 system at the head-end, the DCI401MCS also features a fully Interactive Program Guide.

Key Features

  • HDMI output of Pro:Idiom™ protected content originating on a COM3000
  • Small form factor (4.33” x 0.96” x 3.19”)
  • Analog RF output on channel 3 or 4 of SD or HD In-the-Clear programming
  • RF Remote Control to allow for flexible mounting options
  • Programmable IR commands to control TV power and volume

NTSC-8

For properties that cannot make a complete conversion to digital content, the NTSC-8 allows for COM51 content to be output both in digital format to the QAM – and as an IP output to the NTSC-8 providing NTSC formatted analog output. This replaces the requirement for a stacked receiver solution using mini-mods to duplicate channels for fitness centers or any other TVs unable to support HD or SD digital content.

The NTSC-8 is completely agile with eight outputs allowing for flexibility in RF plant management. It is controlled by the COM3000 using the same interface that controls the COM51 and QAM20. Independent adjustments for the RF output level assists with installation and balancing for each individual deployment.

Key Features

  • Adds analog output to COM3000 systems
  • Up to eight channels in one rack unit
  • No additional COM51 cards needed
  • Agile modulation
  • Per channel adjustable outputs for attenuation
  • Remote management and configuration

We use cookies on our website to support technical features that enhance your user experience.

We also use analytics & advertising services. To opt-out click for more information.